FPV Racing Drone: Difference between revisions
From fakedWiki
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
==== Flight Controller ==== | ==== Flight Controller ==== | ||
* [http://www.holybro.com/product/46 HolyBro Kakute F4 AIO] - with PDB and OSD | * [http://www.holybro.com/product/46 HolyBro Kakute F4 AIO] - with PDB and OSD | ||
==== ESCs ==== | |||
* [https://n-factory.de/Lumenier-BLHeli_S-35A-4-in-1-Regler-OPTO-ESC_1 Lumenier BLHeli_S 35A 4-in-4] | |||
==== Motors ==== | ==== Motors ==== | ||
* 2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cw-2300kv.html ZTW Black Widow 2204-2300kv CW] - with internal ESCs | * <strike>2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cw-2300kv.html ZTW Black Widow 2204-2300kv CW] - with internal ESCs</strike> | ||
* 2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cww-2300kv.html ZTW Black Widow 2204-2300kv CCW] - with internal ESCs | * <strike>2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cww-2300kv.html ZTW Black Widow 2204-2300kv CCW] - with internal ESCs</strike> | ||
* 4x [https://n-factory.de/EMAX-RS2205S-2300kv-Motor_1 EMAX RS2205S 2300kV] | |||
==== Props ==== | ==== Props ==== | ||
Revision as of 21:15, 1 July 2017
Cheap 3S motor/ESC setup to get started, upgrade to 4S later.
Frame
Hovership MHQ2Firefly Pro- Armattan Chameleon (silver) - not 3D printed, but lifetime warranty
Flight Controller
- HolyBro Kakute F4 AIO - with PDB and OSD
ESCs
Motors
2x ZTW Black Widow 2204-2300kv CW - with internal ESCs2x ZTW Black Widow 2204-2300kv CCW - with internal ESCs- 4x EMAX RS2205S 2300kV
Props
- 4x Gemfan 5x4 (CW/CCW) (2 sets + 2 spare sets)
Low Voltage Warner
LiPos
- 2x Turnigy Nano-Tech 1500mAh 3S 35-70C - for drone
- 1x Turnigy Nano-Tech 1500mAh 2S 35-70C - for FPV goggles
VTX
FPV Camera
- RunCam Swift 2 - with 2.5mm lens (FOV: 130°)
VTX/VRX Antenna
TX/RX
Turnigy TGY-i6S Digital Proportional Radio Control System (Mode 2)- FrSky Taranis X9D Plus Special Edition (Carbon)
- FrSky X8R Receiver
FPV Goggles
GPS/Compass
- Ublox NEO-M8N (Compass not usable with Kakute F4, i think - no i2c)