FPV Racing Drone: Difference between revisions

From fakedWiki
Jump to: navigation, search
No edit summary
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
Cheap 3S motor/ESC setup to get started, upgrade to 4S later.
==== Frame ====
==== Frame ====
Should be 3D printed, current options:
* <strike>[https://www.thingiverse.com/thing:511668 Hovership MHQ2]</strike>
* [https://www.thingiverse.com/thing:511668 Hovership MHQ2]
* <strike>[https://www.thingiverse.com/thing:1163884 Firefly Pro]</strike>
* [https://www.thingiverse.com/thing:1163884 Firefly Pro]
* [http://www.armattanquads.com/chameleon/ Armattan Chameleon (silver)] - not 3D printed, but lifetime warranty


==== Flight Controller ====
==== Flight Controller ====
* [http://www.holybro.com/product/46 HolyBro Kakute F4 AIO] - with PDB and OSD
* [http://www.holybro.com/product/46 HolyBro Kakute F4 AIO] - with PDB and OSD
==== ESCs ====
* [https://n-factory.de/Lumenier-BLHeli_S-35A-4-in-1-Regler-OPTO-ESC_1 Lumenier BLHeli_S 35A 4-in-4]


==== Motors ====
==== Motors ====
* 2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cw-2300kv.html ZTW Black Widow 2204-2300kv CW] - with internal ESCs
* <strike>2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cw-2300kv.html ZTW Black Widow 2204-2300kv CW] - with internal ESCs</strike>
* 2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cww-2300kv.html ZTW Black Widow 2204-2300kv CCW] - with internal ESCs
* <strike>2x [https://hobbyking.com/en_us/black-widow-2204-18a-16d-cww-2300kv.html ZTW Black Widow 2204-2300kv CCW] - with internal ESCs</strike>
* 4x [https://n-factory.de/EMAX-RS2205S-2300kv-Motor_1 EMAX RS2205S 2300kV]


==== Props ====
==== Props ====
Line 18: Line 24:


==== LiPos ====
==== LiPos ====
* 2x [https://hobbyking.com/en_us/turnigy-nano-tech-1500mah-3s-35-70c-lipo-pack.html Turnigy Nano-Tech 1500mAh 3S 35-70C] - for drone
* <strike>2x [https://hobbyking.com/en_us/turnigy-nano-tech-1500mah-3s-35-70c-lipo-pack.html Turnigy Nano-Tech 1500mAh 3S 35-70C] - for drone</strike>
* 2x [https://hobbyking.com/en_us/graphene-1500mah-4s-65c-w-xt60.html Turnigy Graphene 1500mAh 4S 65C] - for drone
* 1x [https://hobbyking.com/en_us/turnigy-nano-tech-1500mah-2s-35-70c-lipo-pack.html Turnigy Nano-Tech 1500mAh 2S 35-70C] - for FPV goggles
* 1x [https://hobbyking.com/en_us/turnigy-nano-tech-1500mah-2s-35-70c-lipo-pack.html Turnigy Nano-Tech 1500mAh 2S 35-70C] - for FPV goggles


Line 31: Line 38:


==== TX/RX ====
==== TX/RX ====
* [https://hobbyking.com/en_us/i6s-afhds-2a-black-mode2-6ch-radio-with-colour-box.html Turnigy TGY-i6S Digital Proportional Radio Control System (Mode 2)]
* <strike>[https://hobbyking.com/en_us/i6s-afhds-2a-black-mode2-6ch-radio-with-colour-box.html Turnigy TGY-i6S Digital Proportional Radio Control System (Mode 2)]</strike>
* [http://rclife.co.uk/FrSky-Taranis-X9D-Plus-Special-Edition-Carbon FrSky Taranis X9D Plus Special Edition (Carbon)]
* [http://rclife.co.uk/X8R-Receiver FrSky X8R Receiver]


==== FPV Goggles ====
==== FPV Goggles ====
Line 37: Line 46:


==== GPS/Compass ====
==== GPS/Compass ====
* [https://www.banggood.com/Ublox-NEO-M8N-Flight-Controller-GPS-with-Protective-Shell-for-PIX-PX4-Pixhawk-p-1005394.html Ublox NEO-M8N]
* [https://www.banggood.com/Ublox-NEO-M8N-Flight-Controller-GPS-with-Protective-Shell-for-PIX-PX4-Pixhawk-p-1005394.html Ublox NEO-M8N] (Compass not usable with Kakute F4, i think - no i2c)

Latest revision as of 20:37, 1 July 2017

Cheap 3S motor/ESC setup to get started, upgrade to 4S later.

Frame

Flight Controller

ESCs

Motors

Props

Low Voltage Warner

LiPos

VTX

FPV Camera

VTX/VRX Antenna

TX/RX

FPV Goggles

GPS/Compass

  • Ublox NEO-M8N (Compass not usable with Kakute F4, i think - no i2c)