FPV Racing Drone: Difference between revisions
From fakedWiki
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
* <strike>[https://www.thingiverse.com/thing:511668 Hovership MHQ2]</strike> | * <strike>[https://www.thingiverse.com/thing:511668 Hovership MHQ2]</strike> | ||
* <strike>[https://www.thingiverse.com/thing:1163884 Firefly Pro]</strike> | * <strike>[https://www.thingiverse.com/thing:1163884 Firefly Pro]</strike> | ||
* [http://www.armattanquads.com/chameleon/ Armattan Chameleon (silver)] | * [http://www.armattanquads.com/chameleon/ Armattan Chameleon (silver)] - not 3D printed, but lifetime warranty | ||
==== Flight Controller ==== | ==== Flight Controller ==== | ||
Revision as of 17:42, 30 June 2017
Frame
Should be 3D printed, current options:
Hovership MHQ2Firefly Pro- Armattan Chameleon (silver) - not 3D printed, but lifetime warranty
Flight Controller
- HolyBro Kakute F4 AIO - with PDB and OSD
Motors
- 2x ZTW Black Widow 2204-2300kv CW - with internal ESCs
- 2x ZTW Black Widow 2204-2300kv CCW - with internal ESCs
Props
- 4x Gemfan 5x4 (CW/CCW) (2 sets + 2 spare sets)
Low Voltage Warner
LiPos
- 2x Turnigy Nano-Tech 1500mAh 3S 35-70C - for drone
- 1x Turnigy Nano-Tech 1500mAh 2S 35-70C - for FPV goggles
VTX
FPV Camera
- RunCam Swift 2 - with 2.5mm lens (FOV: 130°)
VTX/VRX Antenna
TX/RX
Turnigy TGY-i6S Digital Proportional Radio Control System (Mode 2)- FrSky Taranis X9D Plus Special Edition (Carbon)
- FrSky X8R Receiver