Fcusb2 module: Difference between revisions
From fakedWiki
(Created page with "After migrating from my virtual machines back to a physical server, because of I/O reasons, i chose to install Debian "squeeze". Unfortunately it seems as if it's getting more di…") |
m (6 revisions imported) |
| (7 intermediate revisions by the same user not shown) | |
(No difference)
| |
Latest revision as of 20:10, 26 August 2016
After migrating from my virtual machines back to a physical server, because of I/O reasons, i chose to install Debian "squeeze". Unfortunately it seems as if it's getting more difficult with every new kernel to get a Fritz!Card USB to work.
This post by 'comolik', although on a SuSE forum, helped me compile the module after spending countless hours trying to figure it out myself.
$ wget http://opensuse.foehr-it.de/rpms/10_3/src/fcusb2-0.1-0.src.rpm $ rpm2cpio fcusb2-0.1-0.src.rpm | cpio -i $ tar -xzf fcusb2-suse93-64bit-3.11-07.tar.gz $ mv fritz fritz_64 $ wget http://opensuse.foehr-it.de/testing/fritzusb2.tgz $ tar -xzf fritzusb2.tgz $ cp fritz_64/lib/fcusb2-lib.o fritz/lib/ $ cd fritz $ sudo make $ sudo make install
I didn't exactly follow it, but the essence is using the 64bit module from the RPM with the sources that compile fine under Debian. That was easy...